Tuesday, June 23, 2020

Easy-To-Follow Steps To Carryout Maintenance For Your Submersible Pumps


Submersible pumps run non-stop if installed in industrial or commercial use. They are prone to get clogged very often. Every day it may not be possible to hire an expert maintenance team. The DIY task can be performed as a regular inspection process.

  • It is important to follow strict electrical submersible pump inspection guidelines when performing the DIY task.
  • Avoid handling things on your own, if unaware of maintenance task
  • You should carry out the task depending on the efficiency of the working pump.

So, some simple steps for regular inspection are important for the good health of the pump.

Regular maintenance frequency

Maintenance is effective if performed after regular intervals of time. Determine the exact frequency of performing a DIY task. Try and follow the basic guidelines provided by manufacturers. Experimentations should be avoided.

Observations are important

Daily, observe the working condition of the pumps. The electrical submersible pump, in general, operates at fixed frequency and performance. If you feel its performance is affected, then it is time to carry out basic inspection.

Observe safety

Opening and inspecting pumps may never be an easy process. A lot of safety has to be observed. The pump uses a lot of electrical power, depending on the output. It is also recommended to check with electrical connections and hydraulic systems.

Mechanical observation

It is important to check the electrical submersible pump for its mechanical performance. Observe the leakage points and seal conditions. These may need replacement after a few hours of consistent usage. Couplings are important to check very often.

Lubricate often

Pumps need to be lubricated very often. All movable parts have to be lubricated. Always select quality lubricating material. If the pump is installed in an industrial unit, always use a standard lubricant. This can affect the work quality of the pump.

It is also important to check with the condition of the motor very often. Replace any fitting that is leaking. Motor vents have to be cleaned very often.



No comments:

Post a Comment